CALL US: 1800 600 602 24/7 Emergency Service

NGP Platform Doors

Platform Doors – NGP System

Next Generation Series of BRT / PSD doors.

Multi Functional Mode Pad
The automatic door is controlled by a six-position digital keypad with Lock, Auto, Exit, Hold Open, Climate and Off Modes.
Pelmet Hinge
The ADIS pelmet design features a unique interlocking hinge to provide secure closure and maximum cover even when mounted hard up against the ceiling.
High Security Locking
An electric lock option is available to give total security and can be adapted where manual locking can not be achieved, i.e. frameless toughened glass doors. Lock type is the microprocessor-controlled electric locking system. The microprocessor monitors all aspects of the locks functions; e.g. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security systems both door position and lock status. The microprocessor is also self-diagnosing.
Activation shall be one of the following:
  • Microwave sensors
  • Flush-mounted sensors
  • Passive infrared sensors
  • Fine line sensors
  • Induction loops
  • Remote control transmitter
  • Key card system.
  • Advantages
  • Automatic Platform Screen Doors
  • Full Height PSD Doors
  • Half Height PSD Doors
  • For Transport Industry for BRT applications
  • Maximum opening width – 4000 mm
  • Maximum door weight – 240 kg
  • Opening speed, variable – 250-1200 mm/sec
  • Closing speed, variable – 50-600 mm/sec
  • Door open dwell time – 0-30 sec
  • Manual opening/closing force – <30N
  • NGC Operator brochure




    Technical Drawings


    BRT Platform Screen Door System

    Half Height PSD Doors

    I. General Technical Parameters

    The system has two opening modes: single slide opening and bi-parting opening
    System total height: ≤1800mm
    System total thickness: ≤300mm
    Tolerance of vehicle parking position: ≤200mm
    Wireless control between vehicle and Platform Screen Door uses infrared remote control. Infrared remote control distance: ≤500mm (LH&RH); ±2000mm (between infrared transmitter and receiver);

    Full Height PSD Doors

    Heavy Duty PSD Doors by ADIS Australia

    PSDs are composed of three main parts – the glass wall, the glass sliding doors, and the door mechanism (and connected accessories).PSD can be installed at level with the bus floor or recessed by at least 600mm from the footpath edge, i.e. at street level. In both cases, PSDs offer an increased level of safety for pedestrians at bus stopping locations, segregating vehicle movement from pedestrian activity.

    The door mechanism includes a number of modules, including the door control unit and the various control panels connected to this door system.


    The following functions can be selected through your wall-mounted key switch or options board:

    • Auto: Doors are operated automatically via the movement sensors.
    • Open: Doors maintained in open position continuously.
    • Exit: Doors remain closed activated only by exiting traffic.
    • Lock: Doors remain closed and locked where optional electric lock function has been installed. Exit by way of emergency exit button.